HPE FlexNetwork MSR958

57
Use undo probe packet-interval to restore the default.
Syntax
probe packet-interval interval
undo probe packet-interval
Default
The packet sending interval is 20 milliseconds.
Views
ICMP jitter operation view
Path jitter operation view
UDP jitter operation view
Voice operation view
Predefined user roles
network-admin
Parameters
interval: Specifies the sending interval in the range of 10 to 60000 milliseconds.
Examples
# Configure the UDP jitter operation to send packets every 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100
probe packet-number
Use probe packet-number to set the number of packets to be sent in a UDP jitter, path jitter, or
voice probe.
Use undo probe packet-number to restore the default.
Syntax
probe packet-number packet-number
undo probe packet-number
Default
A UDP jitter or path jitter probe sends 10 packets and a voice probe sends 1000 packets.
Views
ICMP jitter operation view
Path jitter operation view