HPE FlexNetwork MSR958

24
Monitored
performance
metric
Threshold
type
Collect data in Checked Num Over-threshold Num
RTT
accumulate
Packets sent
after the
operation starts.
Number of sent
packets.
Number of packets with
round-trip time exceeding
threshold.
average N/A N/A N/A
jitter-DS/jitter-SD
accumulate
Packets sent
after the
operation starts.
Number of sent
packets.
Number of packets with
the one-way jitter
exceeding the threshold.
average N/A N/A N/A
OWD-DS/OWD-SD N/A
Packets sent
after the
operation starts.
Number of sent
packets.
Number of packets with
the one-way delay
exceeding the threshold.
packet-loss accumulate
Packets sent
after the
operation starts.
Number of sent
packets.
Total packet loss.
ICPIF N/A N/A N/A N/A
MOS N/A N/A N/A N/A
display nqa result
Use display nqa result to display the most recent result of the specified NQA operation.
Syntax
display nqa result [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA operation.
The operation-tag argument represents the operation tag. Each of the arguments is a
case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an
NQA operation, the command displays the most recent results of all NQA operations.
Examples
# Display the most recent result of the TCP operation with administrator name admin and operation
tag test.
<Sysname> display nqa result admin test
NQA entry (admin admin, tag test) test results: