HPE FlexNetwork MSR958 Command Reference

158
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Examples
# Display information about the PoE profile on GigabitEthernet 1/0/1.
<Sysname> display poe-profile interface gigabitethernet 1/0/1
PoEProfile Index ApplyNum Interface Effective configuration
forIPphone 1 6 GE1/0/1 poe enable
poe priority critical
The Effective configuration field displays the configurations that have taken effect. For the
descriptions of other fields, see Tab le 3 0.
poe disconnect
Use poe disconnect to configure a PD disconnection detection mode.
Use undo poe disconnect to restore the default.
Syntax
poe disconnect { ac | dc }
undo poe disconnect
Default
The PD disconnection detection mode is ac.
Views
System view
Predefined user roles
network-admin
Parameters
ac: Specifies the PD disconnection detection mode as ac.
dc: Specifies the PD disconnection detection mode as dc.
Usage guidelines
If you change the PD disconnection detection mode while the device is running, the connected PDs
are powered off.

HPE FlexNetwork MSR958 Specifications

General

Brand	HPE
Model	FlexNetwork MSR958
Category	Network Router
Language	English