483
Use undo info-center logbuffer to disable log output to the log buffer.
Syntax
info-center logbuffer
undo info-center logbuffer
Default
Log output to the log buffer is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable log output to the log buffer.
<Sysname> system-view
[Sysname] info-center logbuffer
Related commands
display logbuffer
info-center enable
info-center logbuffer size
Use info-center logbuffer size to set the maximum number of logs that can be stored in the log
buffer.
Use undo info-center logbuffer size to restore the default.
Syntax
info-center logbuffer size buffersize
undo info-center logbuffer size
Default
The log buffer can store a maximum of 512 logs.
Views
System view
Predefined user roles
network-admin
Parameters
buffersize: Specifies the maximum number of logs that can be stored in the log buffer. The value
range is 0 to 1024, and the default is 512.
To Next Page
Loading...
