404
Port mirroring commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR1002-4/1003-8S.
• MSR2003.
• MSR2004-24/2004-48.
• MSR3012/3024/3044/3064.
• MSR954(JH296A/JH297A/JH298A/JH299A/JH373A).
• MSR958(JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display mirroring-group
Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Specifies a mirroring group by its ID in the range of 1 to 6.
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1 Inbound
To Next Page
Loading...
