HPE FlexNetwork MSR958

481
Examples
# Set the diagnostic log file saving interval to 600 seconds.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile frequency 600
Related commands
info-center diagnostic-logfile enable
info-center diagnostic-logfile quota
Use info-center diagnostic-logfile quota to set the maximum size for the diagnostic log file.
Use undo info-center diagnostic-logfile quota to restore the default.
Syntax
info-center diagnostic-logfile quota size
undo info-center diagnostic-logfile quota
Default
The maximum size for the diagnostic log file is 5 MB.
Views
System view
Predefined user roles
network-admin
Parameters
size: Specifies the maximum size for the diagnostic log file, in MB. The value range is 1 to 10.
Examples
# Set the maximum size to 6 MB for the diagnostic log file.
<Sysname> system-view
[Sysname] info-center diagnostic-logfile quota 6
info-center enable
Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.