485
Examples
# Create a directory named test under the flash root directory.
<Sysname> mkdir test
Creating directory flash:/test... Done.
# Set the log file directory to flash:/test.
<Sysname> system-view
[Sysname] info-center logfile directory flash:/test
Related commands
info-center logfile enable
info-center logfile enable
Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable
Default
The log file feature is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable log output to the log file.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval at which the system saves logs from the
log file buffer to the log file.
Use undo info-center logfile frequency to restore the default.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
To Next Page
Loading...
