409
undo mirroring-group group-id monitor-port interface-type interface-number
Default
No monitor port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Specifies an existing mirroring group by its ID in the range of 1 to 6.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
You can configure monitor ports only for local mirroring groups.
Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored
traffic.
Do not configure a port of an existing mirroring group as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 1/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 monitor-port gigabitethernet 1/0/1
Related commands
mirroring-group
To Next Page
Loading...
