HPE ProLiant DL360 Gen11 - Results; Remove the hard drive blank; About this task

c. Repeat steps a and b to remove the other server rail.
ResultsResults
To replace the component, reverse the removal procedure.
Remove the hard drive blankRemove the hard drive blank
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Figure 1. Figure 1. Removing an SFF drive blankRemoving an SFF drive blank
Figure 2. Figure 2. Removing an LFF drive blankRemoving an LFF drive blank
HPE ProLiant DL360 Gen11 Server Maintenance and Service Guide 58