HPE ProLiant DL360 Gen11 - Power up the server; About this task; Removing and replacing the front bezel; Procedure

Power up the serverPower up the server
About this taskAbout this task
To power up the server, use one of the following methods:
Press the Power On/Standby button.
Use the virtual power button through iLO.
Removing and replacing the front bezelRemoving and replacing the front bezel
ProcedureProcedure
1. If installed, remove the Kensington security lock.
HPE ProLiant DL360 Gen11 Server Maintenance and Service Guide 52