Power supply optionsPower supply options
Processor and heatsink optionsProcessor and heatsink options
Rack mounting optionsRack mounting options
Riser and riser cage optionsRiser and riser cage options
SecuritySecurity
IntroductionIntroduction
Install any hardware options before initializing the server. If multiple options are being installed, read the installation instructions for all
the hardware options to identify similar steps and streamline the installation process.
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components
to cool before touching them.
CAUTION:CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation
procedure. Improper grounding can cause electrostatic discharge.
Hewlett Packard Enterprise product QuickSpecsHewlett Packard Enterprise product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the product QuickSpecs on
the Hewlett Packard Enterprise website (https://www.hpe.com/info/qshttps://www.hpe.com/info/qs).
ControllersControllers
SubtopicsSubtopics
Installing a type-p storage controllerInstalling a type-p storage controller
Installing a type-o storage controllerInstalling a type-o storage controller
Installing a type-p storage controllerInstalling a type-p storage controller
PrerequisitesPrerequisites
Before installing this option, be sure you that have the following:
The components included with the hardware option kit
T-10 Torx screwdriver
ProcedureProcedure
1. Observe the following alerts:
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
2. Back up all server data.
To Next Page
Loading...
