Removing and replacing a DIMMRemoving and replacing a DIMM
To identify DIMMs installed in the server, see "DIMM slot locations."
PrerequisitesPrerequisites
Before replacing memory, read the memory configuration and population guidelines in the server user guide.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel.
5. Remove the DIMM.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
