Removing and replacing the easy install railsRemoving and replacing the easy install rails
WARNING:WARNING:
To reduce the risk of personal injury or damage to the equipment, you must adequately support
the enclosure during installation and removal.
PrerequisitesPrerequisites
Before you begin, be sure that you have appropriate screwdriver for the screws in the rack.
ProcedureProcedure
1. Power down the server.
2. Extend the server from the rack .
3. Disconnect the cabling.
4. Remove the server from the rack .
5. Place the server on a sturdy, level surface.
6. Remove the front of the rail.
7. Secure the cables.
To Next Page
Loading...
