Removing and replacing a microSD cardRemoving and replacing a microSD card
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel.
5. Remove the microSD card.
For information on the location of the microSD card slot, see System board components.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
