1.3.4 Hot-plug drive spare parts
1.3.5 Solid state NVMe drive spare parts
1.3.6 Solid state M.2 drive spare parts
1.3.7 Solid state SAS drive spare parts
1.3.8 Solid state SATA drive spare parts
1.3.9 microSD spare parts
1.3.10 Systems Insight Display spare parts
1.3.11 Power switch spare parts
1.3.12 Universal Media Bay spare parts
1.3.13 Drive backplane spare parts
1.3.14 Cable kit spare parts
1.3.15 Pensando Distributed Services Platform spare parts
1.3.15.1 Pensando DSP iLO Sideband ALOM Module spare parts
1.3.15.2 Smart I/O (Pensando Distributed Services Platform) spare parts
1.3.16 HPE NS204i-p NVMe OS Boot Device spare parts
1.3.17 Accelerator and GPU spare parts
1.3.18 HPE Trusted Platform Module 2.0 spare part
2 Customer self repair
3 Removal and replacement procedures
3.1 Required tools
3.2 Safety considerations
3.2.1 Electrostatic discharge
3.2.2 Server warnings and cautions
3.2.3 Rack warnings
3.3 Preparation procedures
3.3.1 Power up the server
3.3.2 Power down the server
3.3.3 Extend the server from the rack
3.3.4 Remove the server from the rack
3.3.5 Remove the access panel
3.3.6 Install the access panel
3.3.7 Release the cable management arm
3.4 Removing and replacing the bezel
3.5 Removing and replacing the cable management arm
3.6 Removing and replacing the easy install rails
3.7 Removing and replacing the ball bearing rails
3.8 Removing the hard drive blank
3.9 Removing a SAS/SATA drive
3.10 Removing a hot-plug SAS/SATA basic drive
3.11 Removing and replacing an NVMe drive
3.12 Removing and replacing an M.2 SSD
3.13 Removing and replacing a uFF drive
3.14 Removing and replacing a power supply blank
3.15 Removing and replacing the AC power supply
To Next Page
Loading...
