17. Route the cables through the opening, and then install the universal media bay.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
18. Connect the cables depending on the server configuration. For more information, see Cabling on page
118.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
19. Install the drive bay blank into box 1.
20. Install the fan cage holders (Installing fan cage holders on page 45).
21. Install the fan cage (Installing the fan cage on page 43).
Installing hardware options 73
To Next Page
Loading...
