8. Remove the riser board installed in the riser cage.
9. Align the screw holes on the riser board with the holes on the riser cage, and then install the riser board.
NOTE:
Your riser board might appear different.
10. Install the riser cage (Installing the primary PCIe riser cage on page 38).
11. Install the access panel (Installing the access panel on page 37).
12. Install the server into the rack (Installing the server into the rack on page 53).
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server on page 32.
84 Installing hardware options
To Next Page
Loading...
