8. Do one of the following:
Launch Now
Add another job
9. Click RebootReboot at the completion of the firmware update process.
SubtopicsSubtopics
Determining the installed Intelligent Provisioning versionDetermining the installed Intelligent Provisioning version
Determining the installed Determining the installed Intelligent ProvisioningIntelligent Provisioning version version
To check the Intelligent Provisioning version, click the System InformationSystem Information then check the Intelligent Provisioning version.
Setting Setting Intelligent ProvisioningIntelligent Provisioning Preferences Preferences
About this taskAbout this task
Use Intelligent Provisioning Preferences to change the basic preferences, including the interface, keyboard languages, network and share
setting, system date and time, and software update settings. In addition, the EULA is accessible from this screen.
ProcedureProcedure
1. On the Intelligent Provisioning home screen, click Perform Maintenance.
2. Select Intelligent Provisioning Preferences from the maintenance options.
3. In the Basic Setting tab, select settings for the following options:
Interface Language
Keyboard Language
Boot BIOS Mode - This is always UEFI Optimized .
System Software Update—Select a source for firmware update.
Update from HPE Website
Update from Custom URL
Time Zone
System Date
System Time
Enable Feedback
Accept EULA, or click Read EULA
In the Network Settings tab, enter the following details:
Choose network interface for updates and installs
Use Proxy, and provide proxy details.
DHCP Auto-Configuration, IPv4/IPv6 switch and provide the configuration details.
To Next Page
Loading...
