Shenzhen Hpmont Technology Co., Ltd Appendix A Parameters
HD30 Series Inverters User Manual -119-
No. Name Range
Factory
Default
Unit
Modified
attributes
Setting
Group d00 Status Display Parameters (refer to pages 50
54)
d00.00 Series of the inverter 0x10-0x50
*
d00.01
Software version of the
U1
00.00-99.99
*
d00.02 Reserved
d00.03
Non-standard software
version of the U1
00.00-99.99
*
d00.04 Reserved
d00.05
Software version of the
display panel
00.00-99.99
*
d00.06 Custom series No. 0-9999
*
d00.07
Motor and control
mode
Units: Display the current
driving motor
0: Motor 1
1: Motor 2
Tens: Control mode
0: V/f control without PG
1: Reserved
2: Vector control without PG
*
d00.08
Rated current of the
inverter
5.5kW below type: 0.01A
7.5kW or above type: 0.1A
*
d00.09
Extension function of
the inverter
0: Standard inverter
1: Water and wastewater
applications
*
d00.10 Inverter status
Units:
Bit0: Inverter fault
Bit1: Run/stop
Bit2: Forward/reverse
Bit3: Zero speed running
Tens:
Bit1&Bit0: Acceleration/
deceleration/ constant
Bit2: Reserved
Bit3: DC braking (including
start and stop DC braking)
Hundreds:
Bit0: Parameter auto-tuning
Bit1: Reserved
Bit2: Speed limiting value
Bit3: Reserved
Thousands:
Bit0: Stall overvoltage
Bit1: Current limiting
Bit2: Reserved
Bit3: Reserved
*
A