- 15 -
g)
The use of
power tools for anything other than the intended applicaon can lead to dangerous
situaons.
h) Slippery
handles and gripping surfaces do not allow safe operaon and control of the power
tool in unforeseen situaons.
i) Do not use under-performing tools for heavy loads. Do
not use tools for purposes and work for which they are not intended.
j) Before connued use of the tool safety equipment
must be tested for proper and intended funcon. Check whether the funcon of mov-
ing parts is okay, whether they do not jam, whether any parts are broken, whether all
other parts funcon properly and whether all condions which must be met for the
proper operaon of the device have been met. Damaged protecve devices and parts
should be properly repaired or replaced by trained customer service unless otherwise
specied in this operang instrucons. Damaged switches must be replaced by a cus-
tomer service workshop. Do not use any tools which cannot be properly switched on
and o using the start buon.
a)
There is a risk of re if the baery is used on an unsuitable charger and
the baery can be permanently damaged.
b) The use of other
baeries can lead to injuries and the risk of re.
c)
-
A short circuit between the baery contacts can lead to
burns or re.
d)
Leaking baery uid can lead to skin irrita-
ons or burns.
To Next Page
Loading...
Need help?
General
