HS-Technik NutBee NBPS-21 - Charge State of the Battery

- 30 -
 
NOTE
The tool will only start if the battery has sufficient charge capacity.
When fully charged, the baery will display the charge state on the display on the le
side as a green baery symbol. As the baery voltage decreases the colour of the sym-
bol will change to yellow and then red. When it reaches red an addional warning signal
will sound, the display will read „warn ba“ and recommend changing the baery. Aer
several addional installaons, the tool will no longer start and the display will read „ba
low 2“ with a crossed through baery. The baery must then, at the latest, be changed
(chapter 4.2.1 on page 22).
17.02 V
BATT LOW 2
WARN BATT
17.46 V
P01 000/001
READY
HandMode
P01 000/001
READY
HandMode