- 64 -
Apart from the regular cleaning and the inspecon and maintenance of the threaded
mandrel the baery blind riveng device is largely maintenance-free.
DANGER
Improperly executed work can lead to hazards.
• Repair, maintenance and care of riveting tools must be completed
professionally.
• After the work, no risk for the operator should exist during proper use.
• The operator may only conduct the work described here.
NOTE
Observe the following information for cleaning your tool. Incorrect cleaning
solutions or improper procedures when cleaning can lead to damage to the
riveting device.
Do not use any degreasing or corrosive cleaning soluons and no water. Do not spray any
cleaning soluons, solvents or easily ammable materials into the openings of the housing!
Clean the baery contacts and the baery connecon on the tool with a cloth, coon
swab and a lile alcohol when necessary.
To Next Page
Loading...
Need help?
General
