Connecting to a power source
VIVE Flow automatically turns on when plugged in to any power source such as a power bank.
Not all power banks or phones can provide enough power to VIVE Flow. VIVE Flow requires a
power source that delivers at least 7.5W of power. If you see an "Insufficient power supply"
message in VIVE Flow, connect the VR glasses to another power bank or to a power outlet
using an AC adapter. There's no need to press the Headset or Volume buttons after
connecting to a new power source.
1. Grab the USB Type-C cable from the box and connect one end to the USB Type-C
receptacle cable on VIVE Flow.
2. Connect the other end of the cable to a power source such as a power bank, power outlet,
or your phone.
If connecting to a power bank, make sure to connect the USB Type-C cable to the output port
of the power bank.
The LED indicator in front will light up when VIVE Flow turns on. After a few seconds, the
LED indicator will turn off.
To turn off VIVE Flow, unplug it from the power source.
8 Getting started
To Next Page
Loading...
