3. Select Connectivity Phone pairing (VIVE app).
4. On the phone you want to connect to VIVE Flow, follow the steps in Setting up VIVE Flow
using the VIVE app or VIVE Flow app on page 14.
After the new phone connects to VIVE Flow, you'll see an Unable to connect message on
the phone that was previously connected to VIVE Flow. Tap OK to close the message. You
can still reconnect the phone to VIVE Flow next time. To learn how to reconnect, see
Switching between paired phones or VR controller on page 30.
§ Only one phone can be connected to VIVE Flow at a time.
§ VIVE Flow can only automatically reconnect with the last connected phone.
§ If you can't reconnect your phone to VIVE Flow, refer to Why can't I reconnect my phone with
VIVE Flow? on page 41.
Switching between paired phones or VR controller
If your VIVE Flow is paired with several phones or the VR controller, you can switch between them
on VIVE Flow.
1. While wearing VIVE Flow, press and hold the Volume up and Volume down buttons until
the Switch controller window opens.
2. Do any of the following:
§ Select the phone you want to use with VIVE Flow.
§ Make sure your VR controller is nearby, and then select Switch now to connect it to
VIVE Flow.
§
If you don't see the phone you want to switch to, see Why can't I reconnect my phone with
VIVE Flow? on page 41.
§ If VIVE Flow is paired with more than one phone, select Switch to VR controller to connect
the VR controller to VIVE Flow.
3.
If you chose to switch to a phone, open the VIVE app on the phone you selected.
4. Under Headset, tap your VIVE Flow.
You can also change the headset's input type to phone controller or VR controller. Go to
Settings Controller, and then select the controller input toggle in the upper right.
30 Getting the most out of your VR glasses
To Next Page
Loading...
Need help?
General
Weight and Dimensions
