Putting on VIVE Flow
Open the frame of VIVE Flow, and then wear it as you would regular glasses.
§ Before wearing VIVE Flow, connect it to a power source. See Connecting to a power source
on page 8.
§ If you wear glasses, remove them first before putting on VIVE Flow.
§ It is strongly recommended to take regular breaks. Stop using VIVE Flow if you feel any
discomfort.
If VIVE Flow keeps slipping down your nose while using it, adjust the fit of the face cushion.
Remove the face cushion, and then squeeze the middle part of the face cushion, below the 2
plastic tabs, for a tighter fit.
Do not squeeze the 2 plastic tabs as it may damage the face cushion.
Adjusting the diopter dial
You can adjust the diopter dial even after setting up VIVE Flow. This is useful when sharing your
VR glasses with friends or family so they can adjust it to get a clear and sharp view.
1. If you're currently running an app, tap/press the VIVE button on the controller, and then
select Back to Home.
9 Getting started
To Next Page
Loading...
Need help?
General
Weight and Dimensions
