Task Steps
Grant access
permissions to allow
phone mirroring
(Android
™
phones
only)
In Accessibility Services and Modify system settings, tap
Grant and enable these permissions.
Tip: After granting a permission, tap the back arrow until you're
on the VIVE Manager screen again.
8. If there's a system update available, make sure to install it to get the latest features and
enhancements. After installing the system update, tap Restart in VIVE Manager to restart
the headset.
9. Read the Health and safety reminders and tap I understand.
10. On the Putting on the headset screen, watch how to put on the headset and then tap
Close.
11. Put on your headset to finish setting up the headset. Follow the instructions on the
headset to adjust the IPD and volume, and set up your play area. You can also refer to the
following topics:
§ Adjusting the IPD on the headset on page 25
§ Setting up your play area on page 28
§
If you have trouble pairing the headset, make sure it's powered on and near your phone.
§ If VIVE Manager isn't available, you can set up your headset manually by pressing and
holding the headset button from the Welcome screen.
Adjusting the IPD on the headset
Interpupillary distance (IPD) is the distance between the centers of your eyes. Setting the right
IPD helps in getting a crisp and clear image in VR. You can either set the IPD automatically or
manually.
1. From the Lobby, select Settings.
2. Select General IPD (interpupillary distance).
3. Do one of the following:
To...
Do this
Automatically
adjust the IPD
1. Make sure Automatic IPD adjustment is turned on.
2. Select Start next to Auto-adjust IPD.
3. Follow the onscreen instructions to adjust the IPD.
25 Getting started
To Next Page
Loading...
