LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 1-3 Wireless Connection Application
1.2.4 IPv6
IPv6 is not support
1.3 The WLAN Button
You can use the WIRELESS On/Off button on top of the device to turn the wireless LAN on or
off. You can also use it to activate WPS in order to quickly set up a wireless network with strong
security.
Turn the Wireless LAN On or Off
Step 1 Make sure the PWR/SYS LED is on (not blinking).
Step 2 Press the WIRELESS On/Off button for one second and release it. The WLAN/WPS LED
should change from on to off or vice versa.
----End
Activate WPS
Step 1 Make sure the PWR/SYS LED is on (not blinking).
Step 2 Press the WIRELESS On/Off button for more than five seconds and release it. Press the WPS
button on another WPS-enabled device within range of the LTE Device. The WLAN/ WPS
LED should flash while the LTE Device sets up a WPS connection with the wireless device.
You must activate WPS in the LTE Device and in another wireless device within two minutes of each
other. See Section 5.7.6 for more information.
----End
To Next Page
Loading...
Need help?
General
