Huawei B2268H

LTE TDD B2268H
User Guide
1 Introduction
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
6
LED
COLOR
STATUS
DESCRIPTION
registered.
ETHERNET
1-2
Yellow
(Giga
Ethernet)
On
The LTE Device has a successful 1000 Mbps
Ethernet connection with a device on the Local
Area Network (LAN).
Blinking
The LTE Device is sending or receiving data
to/from the LAN at 1000 Mbps.
Green
(Fast
Ethernet)
On
The LTE Device has a successful 10/100 Mbps
Ethernet connection with a device on the Local
Area Network (LAN).
Blinking
The LTE Device is sending or receiving data
to/from the LAN at 10/100 Mbps.
Off
The LTE Device does not have an Ethernet
connection with the LAN.
USB
Green
On
USB Storage device is plugged in.
Table 1-2 Signal Strength LED Definition
RSRP: dBm
SINR: dB
RSRP <
-114
-114 <= RSRP
<
-109
-109 <= RSRP
<
-104
-104 <= RSRP
< -94
-94 <= RSRP <
-84
RSRP >=
-84
SINR < -2.8
0
1
1
1
1
1
-2.8 <= SINR <
1.2
0
1
2
2
2
2
1.2 <= SINR <
4.8
0
1
2
3
3
3
4.8 <= SINR <
13.2
0
1
2
3
4
4
SINR >= 13.2
0
1
2
3
4
5
Refer to the Quick Start Guide for information on hardware connections.
1.7 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the device to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the web access
password will be reset to the default.
Step 1 Make sure the POWER LED is on (not blinking).