LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
11 MAC Filter
11.1 Overview
This chapter discusses MAC address filtering.
You can configure the LTE Device to permit access to clients based on their MAC addresses in
the MAC Filter screen. This applies to wired and wireless connections.
11.1.1 What You Need to Know
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen.
11.2 The MAC Filter Screen
Use the MAC Filter screen to allow wireless and LAN client’s access to the LTE Device. To
change your LTE Device's MAC filter settings, click Security > MAC Filter. The screen
appears as shown.
To Next Page
Loading...
