LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 11-1 Security > MAC Filter
The following table describes the labels in this menu.
Table 11-1 Security > MAC Filter
Select Enable to activate MAC address filtering.
This is the index number of the MAC address.
Select Allow, to permit access to the LTE Device. MAC addresses not
listed will be denied access to the LTE Device.
If you clear this, the MAC Address field for this set clears.
Enter the MAC addresses of the wireless station and LAN devices that
are allowed access to the LTE Device in these address fields. Enter the
MAC addresses in a valid MAC address format, that is, six hexadecimal
character pairs, for example, 12:34:56:78:9a:bc.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
To Next Page
Loading...
