LTE TDD B2268H
User Guide
8 Network Address Translation (NAT)
Copyright © Huawei Technologies Co., Ltd.
Table 8-1 Network Setting > NAT > Port Forwarding
Click this to add a new port forwarding rule.
This is the index number of the entry.
This field indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that
this rule is not active.
This is the service's name. This shows User Defined if you manually
added a service. You can change this by clicking the edit icon.
This shows the WAN interface through which the service is forwarded.
This is the first external port number that identifies a service.
This is the last external port number that identifies a service.
This is the first internal port number that identifies a service.
This is the last internal port number that identifies a service.
This is the server's IP address.
This shows the IP protocol supported by this virtual server, whether it
is TCP, UDP, or TCP/UDP.
Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note
that subsequent address mapping rules move up by one when you take
this action.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
8.2.2 The Port Forwarding Edit Screen
This screen lets you create or edit a port forwarding rule. Click Add new rule in the Port
Forwarding screen or the Edit icon next to an existing rule to open the following screen.
To Next Page
Loading...
