LTE TDD B2268H
User Guide
8 Network Address Translation (NAT)
Copyright © Huawei Technologies Co., Ltd.
Figure 8-3 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 8-2 Port Forwarding: Add/Edit
Enter a name to identify this rule using keyboard characters (A-Z, a-z,
1-2 and so on).
This is the WAN interface through which the service is forwarded.
Enter the original destination port for the packets.
To forward only one port, enter the port number again in the External
End Port field.
To forward a series of ports, enter the start port number here and the end
port number in the External End Port field.
Enter the last port of the original destination port range.
To forward only one port, enter the port number in the External Start
Port field above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that
begins with the port number in the External Start Port field above.
This shows the port number to which you want the LTE Device to
translate the incoming port. For a range of ports, enter the first number
of the range to which you want the incoming ports translated.
This shows the last port of the translated port range.
Enter the inside IP address of the virtual server here.
To Next Page
Loading...
