LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
7 Routing
7.1 Overview
The LTE Device usually uses the default gateway to route outbound traffic from computers on
the LAN to the Internet. To have the LTE Device send data to devices not reachable through the
default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the LTE Device's LAN
interface. The LTE Device routes most traffic from A to the Internet through the LTE Device's
default gateway (R1). You create one static route to connect to services offered by your ISP
behind router R2. You create another static route to communicate with a separate network
behind a router R3 connected to the LAN.
Figure 7-1 Example of Static Routing Topology
7.2 Configuring Static Route
Use this screen to view and configure IPv4 static routes on the LTE Device. Click Network
Setting > Static Route to open the following screen.
To Next Page
Loading...
