LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
specified phone number.
Specify the phone number in the To Number field on the right.
Select this if you want the LTE Device to forward incoming calls to the
specified phone number if the phone port is busy.
Specify the phone number in the To Number field on the right.
If you have call waiting, the incoming call is forwarded to the specified
phone number if you reject or ignore the second incoming call.
Select this if you want the LTE Device to forward incoming calls to the
specified phone number if the call is unanswered. (See No Answer Time.)
Specify the phone number in the To Number field on the right.
This field is used by the Active No Answer Forward feature.
Enter the number of seconds the LTE Device should wait for you to answer
an incoming call before it considers the call is unanswered.
Hot Line/
Warm Line
Enable
Enable Warm Line or Hot Line feature on the LTE Device. A hot line or
warm line number is a phone number.
Hot Line/
Warm Line
number
Enter the number to be dialed once the phone is off the hook immediately
(Hot Line) or after the time the phone remains off the hook has surpassed
the delay period (Warm Line).
Enter the duration the phone can remain off the hook before automatically
dialing the warm line number. You can set the delay from 1 to 15 seconds.
Active
Anonymous
Call Block
Select this if you do not want the phone to ring when someone tries to call
you with caller ID deactivated.
Click Apply to save your changes.
Click Back to return to the previous screen without saving.
13.4 The Phone Region Screen
Use this screen to maintain settings that depend on which region of the world the LTE Device is
in. To access this screen, click VoIP > Phone > Region.
Figure 13-4 VoIP> Phone > Region
To Next Page
Loading...
