LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Table 6-3 Static DHCP: Add
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your LAN
with the MAC address that you will also specify.
Click Apply to save your changes.
Click Back to exit this screen without saving.
6.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically
join a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer
in use.
Use the following screen to configure the UPnP settings on your LTE Device. Click Network
Setting > Home Networking > Static DHCP > UPnP to display the screen shown next.
Figure 6-4 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 6-4 Network Settings > Home Networking > UPnP
Select Enable to activate UPnP. Be aware that anyone could use a UPnP
application to open the web configurator's login screen without entering
the LTE Device's IP address (although you must still enter the password
to access the web configurator).
Click Apply to save your changes.
6.5 The File Sharing Screen
To Next Page
Loading...
