LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Table 6-2 Network Setting > Home Networking > Static DHCP
Click this to add a new static DHCP entry.
This is the index number of the entry.
This field displays whether the client is connected to the LTE Device.
This field displays the client host name.
The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Select the check box in the heading row to automatically select all check
boxes or select the check box(es) in each entry to have the LTE Device
always assign the selected entry(ies)'s IP address(es) to the
corresponding MAC address(es) (and host name(s)). You can select up
to 128 entries in this table.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Click Refresh to reload the DHCP table.
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 6-3 Static DHCP: Add
The following table describes the labels in this screen.
To Next Page
Loading...
