LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
This is the present Firmware version.
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click this to find the .bin file you want to upload. Remember that you
must decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to three
minutes.
Check New Firmware from Server
Enter the IP address or URL of the update server and click the Check
button to check if a new firmware file is available on the server.
Click this to save the specified server URL so it can be used after a power
cycle.
After you see the firmware updating screen, wait a few minutes before logging into the LTE
Device again.
Figure 22-5 Firmware Uploading
The LTE Device automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 22-6 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
To Next Page
Loading...
