LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Backup Configuration
Backup Configuration allows you to back up (save) the LTE Device's current configuration to a
file on your computer. Once your LTE Device is configured and functioning properly, it is
highly recommended that you back up your configuration file before making configuration
changes. The backup configuration file will be useful in case you need to return to your
previous settings.
Click Backup to save the LTE Device's current configuration to your computer.
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from
your computer to your LTE Device.
Table 23-1 Restore Configuration
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click this to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
Click this to reset your device settings back to the factory default.
Do not turn off the LTE Device while configuration file upload is in progress.
After the LTE Device configuration has been restored successfully, the login screen appears.
Login again to restart the LTE Device.
The LTE Device automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 23-2 Network Temporarily Disconnected
If you restore the default configuration, you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, an error screen will appear. Click OK to go back to the
Configuration screen.
To Next Page
Loading...
