LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 4-3 WAN Interface Edit
The following table describes the fields in this screen.
Table 4-2 WAN Interface Edit
Select the checkbox to enable the WAN interface.
Specify the name for this WAN interface.
Select IPv4 Only if you just connect this WAN interface to an IPv4
network.
Select IPv6/IPv4 Dual Stack if you connect this WAN interface to
both an IPv6 and an IPv4 networks.
Select this to have the LTE Device configure the APN (Access
Point Name) of an LTE network automatically. Otherwise, enter
the APN manually in the field below.
Enter the APN of an LTE network, which your service provider
gave you.
The Maximum Transmission Unit (MTU) defines the size of the
To Next Page
Loading...
