LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 5-6 Wireless > General: More Secure: WPA(2)
The following table describes the labels in this screen.
Table 5-5 Wireless > General: More Secure: WPA(2)
Select More Secure to enable WPA(2)-PSK data encryption.
Choose WPA or WPA2 from the drop-down list box.
Enter the IP address of the external authentication server in dotted
decimal notation.
Enter the port number of the external authentication server. The default
port number is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
Enter a password (up to 128 alphanumeric characters) as the key to be
shared between the external authentication server and the LTE Device.
The key must be the same on the external authentication server and your
LTE Device. The key is not sent over the network.
Click more... to show more fields in this section. Click hide more to hide
them.
This field is only available for WPA2. Select this if you want the LTE
Device to support WPA and WPA2 simultaneously.
To Next Page
Loading...
