LTE TDD B2268H
User Guide
Copyright © Huawei Technologies Co., Ltd.
Figure 5-9 Network Setting >Wireless>WPS
The following table describes the labels in this screen.
Table 5-8 Network Setting > Wireless > WPS
Select Enable to activate WPS on the LTE Device.
Add a new device with WPS Method
Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).
Click this button to add another WPS-enabled wireless device (within
wireless range of the LTE Device) to your wireless network. This button
may either be a physical button on the outside of device, or a menu button
similar to the WPS button on this screen.
Note: You must press the other wireless device's WPS button within two
minutes of pressing this button.
Use this section to set up a WPS wireless network by entering the PIN
(Personal Identification Number) of the client into the LTE Device.
Enter the PIN of the device that you are setting up a WPS connection with
and click Register to authenticate and add the wireless device to your
wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two minutes to
have it present its PIN to the LTE Device.
WPS Configuration Summary
The PIN of the LTE Device is shown here. Enter this PIN in the
configuration utility of the device you want to connect to using WPS.
To Next Page
Loading...
