02 (2011-05-25)
This is the second official release.
Compared with 01 (2011-03-30), this issue incorporates the following changes:
Content Change Description
Installing a BBU Power Cable The connections of the BBU power cables are
changed when two UPEUs are installed in the
BBU.
Installing a BBU Power Cable
Installing a BBU Power Cable
Installing IMB03 Cables
Compared with 01 (2011-03-30), no content is added.
Compared with 01 (2011-03-30), no content is deleted.
01 (2011-03-30)
This is the first official release.
Compared with Draft A (2011-01-30), this issue incorporates the following changes:
Content
Change Description
6.7 Installation Checklist The description about checking the cable
installation is added.
Compared with Draft A (2011-01-30), this issue is added with the following topics:
l 6.4.7 Installing the GPS Surge Protector
l 9.4.8 Installing a GPS Clock Signal Cable
Compared with Draft A (2011-01-30), no content is deleted.
Draft A (2011-01-30)
This is the draft release.
Compared with the installation guide of MBTS V100R003C00, WCDMA-NodeB
V200R012C00, and GSM-BTS V100R012C00, this document adds the following topics:
l The procedures for installing cabinets, boards or modules, and related cables in the indoor
scenario with DC power supply (BBU installed indoors and RRU powered outdoors) and
in the indoor scenario (BBU installed in an IMB).
l The procedures for installing cabinets, boards or modules, and related cables in an outdoor
APM30H (Ver.B) or outdoor TMC11H (Ver.B).
Compared with the DBS3900 Installation Guide of MBTS V100R003C00, WCDMA-NodeB
V200R012C00, and GSM-BTS V100R012C00, this document omits the following topics:
DBS3900 (Ver.B)
Installation Guide 1 Changes in the DBS3900 (Ver.B) Installation Guide
Issue 06 (2011-09-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
To Next Page
Loading...
Need help?
General
