Figure 10-7 Installing the expansion bolt assembly
(1) Bolt M10 x 75 (2) Spring washer 10 (3) Plastic tube (4) Flat washer 10 (5) Expansion tube
Step 3 Align the expansion bolt assemblies with the hole and secure the backplane to the wall, as shown
in Figure 10-8.
Figure 10-8 Installing the backplane
DBS3900 (Ver.B)
Installation Guide
10 Outdoor Scenario with AC Power Supply (BBU Installed
in an OMB)
Issue 06 (2011-09-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
335
To Next Page
Loading...
