Figure 13-30 Tightening the bolts at the lower part of the IMB03
----End
Installing the IMB03 on the IFS06 (Back-Mounted)
This section describes the installation procedure of the IMB03 back-mounted on the IFS06.
Context
One or two IMB03s can be installed on the IFS06, as shown in Figure 13-31. To install the
lower IMB03, move down the lower adjusting beam to the middle position. To install the upper
IMB03, move down the upper adjusting beam to the middle position, as shown in Figure
13-33.
DBS3900 (Ver.B)
Installation Guide 13 Indoor Scenario (BBU Installed in an IMB03)
Issue 06 (2011-09-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
456
To Next Page
Loading...
Need help?
General
