EasyManua.ls Logo

Huawei MTS9300A - 1.5 Mechanical Safety

Huawei MTS9300A
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Any violations must be promptly pointed out by the site manager or safety
supervisor and the involved personnel should be prompted for correction.
Personnel who fail to stop violations will be forbidden from working.
Operators who violate the safety regulations are responsible for accidents
caused. The supervisor has to bear the responsibility accordingly.
1.5 Mechanical Safety
Hoisting Devices
D ANGER
Do not walk under hoisted objects.
Only trained and qualied personnel should perform hoisting operations.
Check that hoisting tools are available and in good condition.
Before hoisting objects, ensure that hoisting tools are
rmly secured onto a
load-bearing object or wall.
Ensure that the angle formed by two hoisting cables is no more than 90
degrees, as shown in the following
gure.
Do not drag steel ropes and hoisting tools or bump hoisted objects against
hard objects during hoisting.
Using Ladders
Use wooden or
berglass ladders when you need to perform live working at
heights.
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 1 Safety Precautions
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 9

Table of Contents

Other manuals for Huawei MTS9300A

Related product manuals