Huawei MTS9300A - Installing an AC Input Power Cable; Installing Three-Phase Four-Wire Input Power Cable

Step 4 Install communications cables for the intelligent power distribution unit.
Figure 5-15 Installing a communications cable for one intelligent power
distribution unit
----End
5.5 Installing an AC Input Power Cable
Prerequisites
Step 1 Use cables, cord end terminals to prepare an AC input power cable.
Figure 5-16 Preparing a cord end terminal
(1) Cable
(2) Cord end terminal (3) Crimping tool
----End
5.5.1 Installing Three-Phase Four-Wire Input Power Cable
Procedure
Step 1 Connect the cables between the ACDB and the AC power distribution box.
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 5 Installing Cables
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 39