Huawei MTS9300A - Drilling Holes and Installing Expansion Sleeves

Procedure
Step 1 Turn over the packing box, the marking-o template is shown.
Step 2 Drill holes in the four dots on the position of mounting holes on the
marking-o
template.
Step 3 Mark cabinet mounting holes based on the marking-o template.
Figure 3-2 Marking mounting holes
----End
3.3 Drilling Holes and Installing Expansion Sleeves
Procedure
Step 1 Remove the cabinet stack and take out the
at washer.
Figure 3-3 Taking out the at washer
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 3 Installing a Cabinet
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 19