Huawei MTS9300A - 3.6 Sensors; 3.6.1 Door Status Sensor; 3.6.2 Digital Temperature and Humidity Sensor

Figure 5-5 Connecting a communications cable (over the RS485 port)
(1) RS485/RS232 port on the SMU (2) MON1 port on BBU
----End
5.2.4 Third-Party NMS Management (over SNMP)
Procedure
Step 1 Connect the FE port on the SMU by using a network cable.
Figure 5-6 Connecting a communications cable (for third-party NMS
management)
(1) SNMP-based NMS terminal
(2) FE port on the SMU
----End
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 5 Installing Cables
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 33