Huawei MTS9300A - 4.3.6 Replacing a Door Status Sensor

Main Menu Second-Level
Menu
Third-Level
Menu
Default Value Settings
NTP Enable No Yes/No
NOTE
Set the parameter to Yes
if you need to
synchronize the SMU
time and the site
network server time.
8.5 Setting the AC Input System
Set the AC input system based on site requirements.
Table 8-3 Setting the AC input system
Main Menu Second-Level
Menu
Third-Level
Menu
Setting
Parameters Settings Mains AC Mode Set as required.
8.6 Setting the 57 V Constant Voltage Parameter
Set the 57 V constant voltage parameter based on site requirements.
Table 8-4 Setting the 57 V constant voltage parameter
Main Menu
Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Setting Value
Parameters
Settings
Li Battery Basic
Parameters
Work Mode 57V Mode ● 57V Mode
● 48V Mode
8.7 Setting DCDB Parameters
Set DCDB parameters based on site requirements.
Table 8-5 Setting DCDB parameters
Main Menu
Second-Level
Menu
Third-Level
Menu
Fourth-Level Menu Value
Parameters
Settings
DC Power DMU LLVD n Enabled Enable/ Disable
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 8 Commissioning
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 55