6.1.1 Installing Lithium Batteries
Prerequisites
● Before installing lithium batteries, ensure that the cabinet anchor bolts are
tightened.
● Install lithium batteries on the lower layer and then the upper layer.
● The 560 mm deep lithium battery supports mounting ear adjustment.
Procedure
Step 1 Adjust the mounting ears of the lithium battery based on the cabinet depth.
Figure 6-1 Adjusting mounting ears
Step 2 Secure a lithium battery to the rack.
● At least two people are required to install it.
● Before pushing the lithium battery into the cabinet, reset the handles on both
sides of the battery to prevent the support bars from being stuck.
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide 6 Installing Batteries and Cables
Issue 01 (2021-05-30) Copyright © Huawei Technologies Co., Ltd. 47
To Next Page
Loading...
